MVD-1000D1数显显微硬度计(自动转塔)
Model MVC-1000D1 Digital Micro Hardness Tester

MVD-1000D1型数显显微硬度计是光机电一体化的高新技术产品,该仪器造型新颖、美观，而且它具有良好的可靠性，可操作性和直观性，是显微硬度计的升级换代产品。
　　该机采用计算机软件控制，高倍率光学测量系统，光电传感等技术实现测量装置与压头自动切换，通过软件输入，光源的强弱自动调节，并选择维氏与克氏试验方法、保持时间，文件号与储存等，提供了各种硬度值的转换表以供参考，在LCD大屏幕显示屏上能显示试验方法，试验力，测量压痕长度、硬度值、试验力保持时间，测量次数并能键入年、月、日期，试验结果和数据处理等，通过打印机输出。
该机可测定钢、有色金属、IC薄片、薄塑料、金属薄片、涂层、表面覆层、层压金属、热处理碳化层和淬火硬化层的深度与硬度梯度。

The D1 MVD-1000 type counts to show it is high and new technique product that light machine electricity integral whole turn that degree of hardness account, the instrument"s shape is novel, beautiful, and it have the good and dependable, maneuverability with keep the view, is a grade creep to show minute details degree of hardness account to change the on behalf product.
The machine"s adoption calculator software controls, the high magnification optics measures the system, the light fax feels the etc. Technique realizes the diagraph equips with press a cuts over automatically, passing the software importation, the strong or weak of the light source regulates automatically, and choose the surname of experiments with gram surname the method and keeps time, document number and storage etc., Provide the worth conversion in every kind of degree of hardness form toes provide to consult, can show to experiment the method in LCD ising big to hold act showing holding, experimenting the dint, measuring to press the length of , degree of hardness the value and experiment the dint keeps time, measure the number of times combine it can key- in the year, month, date, experimenting the result handles with data etc., pass the printer exportation.
That machine can measurese the steel, have the color metals, the thin slice of IC, thin plastics, metals thin slice and draw the layer, surface layer, layer presses the metals, heat handles the carbonization layer hardens the depth of the layer with the fire of and degree of hardness steps degree.

MVD-1000D1型数显显微硬度计技术规格
显微维氏标尺HV0.01, HV0.025, HV0.05, HV0.1, HV0.3,
HV0.5, HV1
转换标尺洛氏、布氏
显示5位数的硬度值，4位数的对角线长度(D1,D2)，GO/NG设定值，
试验力，保持时间，测试次数，平均值、标准偏差，回归
试验力10-25-50-100-200-300-500-1000gf
符合EN-ISO 6507
加卸载控制全自动(加载/保持/卸载)试验力保持时间5 ~ 60秒(1秒为增量)
试验力选择外置式选力手轮
物镜放大倍数10×，40×
测量目镜自动数字式编码器 总放大倍数100×(观察)，400×(测量)
测量范围200μm 分辨率0.01μm
XY试台
尺寸100×100mm
行程范围25×25mm
小读数0.01mm
试件
高度85mm
宽度 120mm(从压头中心线起至机壁距离)
输出内置打印机(硬度值和统计数据)，RS232串行接口
电源110-220V 50Hz
尺寸490×185×515mm
重量35kg