| DMS - 54(44)A
TRMS AC V/A Meter (4-sets)
DMS - 54(44)D
DC V/A, Analog Meter (4-sets)
DMS - 52(42)A
TRMS AC V/A Meter (2-sets)
DMS - 52(42)D
DC V/A, Analog Meter (2-sets)
DMS - 42C
RTD Temperature Meter (2-sets) |
|
| | | ..Specifications | | Display： | | Red LED 0.4" (10.1mm) high
Green LED 0.3" (7.6mm) high | | Max. Display： | | 4 1/2 digits (DMS-5), 4 digits (DMS-4) | | Polarity Display： | | "—" symbol is displayed automatically | | Over range Indication： | | " o.L " | | Conversion Rate： | | 2.5/sec.(DC) or 1/sec.(AC) | | Decimal Point： | | Settable to any digit position by front
sheet switch | | External Control： | | Hold | | Accuracy： | | ±0.1% FS.(DMS-5), ±0.2% FS.(DMS-4) | | Operating Temp.： | | 0~60℃/ Below 80%R.H. | | Storage Temp.： | | -10~70℃/ Below 70% R.H. | | Power Supply： | | AC 115 / 230V±10%, 50/60Hz | | Option： | | DC 12, 24, 48, 120V±20% | | Power Consumption： | | Approx. 5VA | | Weight： | | Approx. 550g | | Dielectric Strength： | | AC 1500V/1min ( Input / Power ) | | Insulation Resistance： | | More than 100MΩ at 500VDC | | Dimensions： | | 96(W) x 48(H) x 144(D)mm | | Panel Cut-Out： | | 91.5(W) x 44(H)mm |
|
| | ..Comparison section | | | Control System：Microcomputer
Setting Range：-19999 to +19999 (-9999~+9999)
Relay Contact Capacity：AC 250V, 1A resistive load
----------------------------------DC 30V, 2A resistive load
| | | Comparative Condition：
Model：DMS - 54(44)
Indication＞HH set point → HH LED on .
HH set point ≧Indication＞HI set point → HI LED on .
HI set point ≧Indication＞LO set point → GO LED on .
LO set point ≧Indication＞LL set point → LO LED on .
LL set point ≧Indication → LL LED on .
Model：DMS - 52(42)
Indication＞HI set point → HI LED on .
HI set point ≧Indication＞LO set point → GO LED on .
LO set point＞Indication → LO LED on . |
|
| | ..Features | - Relay output time delay 0~99sec.
- True RMS V/A
- Rate free setting
- 4~20mA, 1~5V Measurement
- Output DC 24V (30mA) for two wire sensor
- Direct setting function
- DIN case 96 x 48mm
|
|
|
|
| | |
|
