Static Shoes/Wrist Strap Tester The product bases on ISO/CD8782-1 standard ,which can test ground resistance of hand and feet, and there is LED display and alarm. It is an absolutely necessary tester in static control. It uses 9V battery and has low voltage and safety. User can easily adjust the height of tester. How to correctly Operate the tester: 1. to test ESD shoe/foot grounder To dial “Selective Switch” to the left “Foot Wear”, and stand on the testing board after wearing ESD Shoe, then press “PRESS TO TEST” key. In this way, The Left light will display the ground resistance range of left foot wearing the ESD shoe and the Right light will display the one of right foot. 2. to test Anti-static wrist strap To dial “Selective Switch” to the right “wrist strap”, and link the connector plug (or fish clip) with the jack (pole) after wearing wrist strap, then press “PRESS TO TEST” key. In this way, The Right light will display the ground resistance range of wrist strap. Testing value antitheses Sheet: ITEM RANGE LED DISPLAY FOOT WEAR WRIST STRAP ALARM VOICE HIGH R＞100MΩ R.＞10MΩ YES PASS R≥800KΩ R≤100MΩ R≥750KΩ R≤10MΩ NO LOW R＜800KΩ R＜750KΩ YES LOW BATTERY Voltage<7V，Please change battery. Note: Testing precision within +15%, to adjust by movable exactitude resistance box. (PANEL CHART)
