产品名称: uv能量计+温度+uv强度 
产品编号: uv-int 160
推荐价格: 电议
简要说明: 仪器适用： 测量UV紫外光强度，能量，温度， 仪器装有软件，具有记忆功能，能联电脑使用。 
  
 
 
德国UV-int160
UV能量计
型    号：德国UV-int160
仪器适用： 测量UV紫外光强度，能量，温度，
     仪器装有软件，具有记忆功能，能联电脑使用。
波长范围： UV 250 - 410 nm
输入功率： 0 -- 5,000 mW/
测量范围： 0-- 2,000 mW/cm2
显示范围： 0 -- 36,000 mJ/cm2
能量显示： 2×16位LCD液晶
测量： ± 5 %
测量温度： 0--115°C
取样速度： 0.01 秒(100次/秒)
记录周期： 120秒.
仪器电源： 2 ×3.6 V 长效锂电池
仪器功耗： 20 uA
电池寿命： 2,000 次
仪器尺寸： 120×70×13 mm
仪器重量： 200 g
工作极限： 置于110°C 测量环境中≯10秒
仪器功能：
1.仪器装有UV传感器与微处理器；
2.装有测量记忆软件，能将测量到的光强度、能量、温度值输入到电脑里；
3.具能自动开机，自动关机功能；
4.置于仪器背后的传感器上覆有保护材料

UV Integrator 160
+ UV-intensity mW/cm2
+ UV-dose mJ/cm2
+ selectable “triggered mode”*
+ LCD display
+ temperature °C/°F
+ SD Memory Card Slot
+ graphic chart on PC
+ re-chargeable accu cells with charger
The UV Integrator 160 is a small, self-contained, high quality UV measuring instrument. It is designed to
measure and display peak UV intensity in mW/cm2, UV dosage in mJ/cm2 and temperature in the UV
curing process.
In the standard version it is equipped with one UV sensor and one temperature sensor for the measuring
of:
Full UV 250 – 410 nm
Temp 32 to 230° F / 0 to 110° C
With this total UV band peak energy and dose measuring, most of the measuring requirements of UV
curing applications can be covered.
Due to its UV sensor and the integrated microprocessor the UV Integrator 160 can measure and display
the peak UV-intensity of the total UV spectrum (mW/cm2).
Additionally, this UV-measuring instrument is calculating the UV-dosage (mJ/cm2) of the UV energy
supplied during the time of exposure of one measuring cycle. The UV-dosage is calculated as the total
Integral of UV-dosage over the full UV spectral bands.
An extra sensor is measuring temperatures from 32 to 230° F / 0 to 115° C.
The sensors are on the back of the unit which also serves as a heat shield. After completion of the
measuring cycle the measuring results can be scrolled through on the built in 2 x 16 digit LCD display.
*This Integrator features a selectable ?triggered mode“, i.e. the 60 sec recording cycle starts within a 120
second readiness phase not before the incident UV-intensity exceeds 2 mW/cm2.
This microprocessor integrator is additionally equipped with an SD Memory Card Slot. All measuring data
are stored on an SD-Memory Card and can be downloaded to a computer. The special evaluation
software allows to show, edit and store a history of the measuring results of the entire measuring cycle as
graphic and numeric charts (mW/cm2),(mJ cm2) and (°C/°F).
A special AUTO-OFF feature that turns off the unit automatically after one minute serves as energy
saving and extension of the battery service life.
The UV Integrator 160 is available in five different measuring ranges:
(Please state upon order)
Item 48.2.1 UV Integrator 160, Type 1 Diazo 350 – 460 nm + Temp
Item 48.2.2 UV Integrator 160, Type 2 UV-A 315 – 410 nm + Temp
Item 48.2.3 UV Integrator 160, Type 3 UV 250 – 410 nm + Temp
Item 48.2.4 UV Integrator 160, Type 4 UV-B 280 – 315 nm + Temp
Item 48.2.5 UV Integrator 160, Type 5 UV-C 230 – 280 nm + Temp
Item 48.2.6 UV Integrator 160, Type 6 UV-V 395 – 445 nm + Temp