结 构：

■ 表壳采用密封防尘防水结构，阻燃、抗老化。
■ 1只红色LED灯指示电量脉冲，电表每累计一个脉冲当量的电能时，脉冲灯闪烁。1只 LED灯指示电表拉闸状态，1只LED灯用于指示缺相状态，1只LED灯用于报警指示。
■ 电表IC卡插座在小门内，具有自保护功能，插卡时小门打开。
■ 一路光耦隔离脉冲输出，输出宽度约为80ms，供校验使用。
■ 电量显示采用LED数码管显示方式，剩余电量等于报警电量时，LED数码管显示常亮，同时发出报警信号声，提醒用户及时购电。
■ 采用IC卡作为电量传递介质。IC卡经过加密运算，一户一卡，互不通用。
■ 采用铁电存储器，数据保存可靠。
■ 采用大容量磁保持继电器，低功耗高可靠。
技术参数：
■ 额定电压(V)： 3×220/380
■ 工作电压范围：70%Un～120%Un
■ 额定电流(A)：3×1.5(6), ,3×5(20), 3×5(30), 3×5(40), 3×10(40), 3×10(60), 3×15(60) ,3×20(80)
■ 额定频率(Hz)：50
■ 准确度等级：1级 2级
■ 功耗：电压回路(每相)≤3W，10VA；电流回路(每相)≤1.5VA
■ 工作温度(℃)：-25～+55，极限工作温度(℃)：-45～+70
■ 相对湿度：≤75%（年平均）
■ 显示范围：0～999999kWh
■ 数据保护：断电后数据保存时间＞10年
■ 外形尺寸（mm）：
■ 平均使用寿命（年）：＞10
功 能：
■ 正反向有功电能计量。
■ IC卡预付费用电，用电量递减。
■ 剩余电量不足报警，剩余电量为零或到达设定的赊欠电量值时，跳闸断电提醒用户及时购电。
■ 超负荷时自动断电（可选）。
■ 具有数据回写功能。
■ 能显示剩余电能量以及其它各种信息。
适用范围：
■ 3×220/380V 3×1.5(6)A 为经互感器接入式仪表，适用于频率为50Hz（60Hz）的三相三线制 高压供电低压计量实施预付费的大工业用户计费用表及三相四线制低压供电实施预付费的工业、非 工业用户计费用表。
■ 3×220/380V 3×5(20)---- 3×20(80)A 为直接接入式仪表，适用于频率为50Hz（60Hz）的 三相四线制低压供电实施预付费的工业、非工业用户计费用表。也适用于因电量大采用三相四线 制低压供电实施预付费的居民照明计费用表。
Main Features
■ Using IC card /Having compositive functions of energy measurement, load monitoring and information management
■ Adopting foreign famous measurement chip and manufactured with advanced SMT process
■ Excellent against tamper and fraud function; high reliability ;small volume, multi-function
■ Ideal products for energy monitoring and load adjustment of electricity network
■ All specification meeting standard GB/T17215-2002 on “Alternating current static watt-hour meters for active energy (classes1 and 2) “and GB/T18460.3-2001 on Pre-payment vending system using integrated circuit (s) cards with contacts-part 3:Pre-payment electricity meters. Structure
■ With sealed case of flame-retardant ,water-proof rust-proof, water-proof and anti-aging
■ Having four red LED. One indicating power pulse and flashing once per pulse; One indicating on-off state of meter; One indicating state of phase absence; Another is for alarm indication.
■ Socket for IC card is designed in a small door with self-protective function and open the door to plug the card
■ One channel of optical pulse output for calibration with width of about 80ms
■Displaying energy by LED. When remaining energy reaches the alarm quantify. LED flashes while giving alarm voice
■One IC card for one meter and energy quantify is transmitted through the encrypted card
■Adopting FeRAM (Ferroelectric random-access memories) to ensure reliable storage
■Applying large capacity magnetic-holding electrical relay to ensure lower power consumption and high reliability
Technical Parameters
■ Rated Voltage(V) : 3×220/380
■ Operation Voltage (v) 70%Un~120%Un
■ Rated Current(A) : 3×1.5(6); 3×5(20), 3×5(30), 3×5(40),3×10(40), 3×10(60) ，3×15(60) , 3×20(80),
■ Rated Frequency(Hz): 50，
■ Accuracy: class1, class2
■ Power Consumption: voltage circuit:≤3W/10VA / phase　current circuit: ≤1.5VA / phase
■Ambient Temperature(℃): -25~+55，Limits of temperature(℃): -45~+70
■Relative Humidity: ≤75% (annual average)
■Range of display: 0~9999kWh
■Date can be kept for more than 10 years when power off
■Size（mm）：
■ Life(year):＞10
Function
■Measuring both positive and negative active energy
■Prepaying the energy which reduces continuously
■When there is not enough remaining energy, meter will alarm. When the remaining energy reaches zero or one specified quantify, power supply is cut off to remind the user to buy energy
■Automatically cut off power supply when overloaded (to be selected)
■Able to write back data
■Able to display remaining energy and other information Scope of Use
■3×220V/380V ×1.5(6)A is for transformer operated meters suitable for big industrial unit using prepaid 50Hz(60Hz) of 3-phase 3-wire electric power which is high-voltage supplied while low-voltage measured or suitable for industrial & non-industrial unit using prepaid 50Hz(60Hz) of 3-phase 4-wire electric power which is low-voltage supplied
■3×220V/380V 3×5(20)A----3×20(80) is for direct connected meter suitable for industrial & non-industrial unit using prepaid 50Hz(60Hz) of 3-phase 4-wire electric power which is low- voltage supplied or suitable for large-energy- consuming residential energy measurement using prepaid 3-phase 4-wire electric power which is low- voltage supplied